Our Rear Door Window Integrated Blind kit houses a Horrex Duoplisse blackout blind and is made up of multiple CNC profiled plywood & aluminium parts which can be lined in a variety of materials to match (or contrast with) the rest of your conversion. Fitted within the recesses of the sliding door to create a frame-less aesthetic, the integrated blind panel mounts to our specially designed aluminium brackets, allowing a flush fit with the inner surface of the rear door whilst maintaining a cavity to the outer skin.
The outer panel is machined from 6.5mm Birch Plywood and is supplied with a cutout to match the 500mm x 400mm integrated blind with the window profile. We supply adhesive foam tape within the kit to create a neat finish between the blind and window and provide black vinyl to mask the area behind the blind on the glass.
The kit is fitted to the door using the four aluminium brackets provided, which are riveted to the metalwork of the van. Positioning of these brackets is made easy with the use of our instructions and special alignment tool. The finished surround can easily be fitted to the four brackets using the stainless bolts and chimney nuts, with built in adjustment to perfect the alignment.
The kit can be supplied as a fully lined kit (in Anthracite or Silver automotive carpet) or as a Bare kit (pre-assembled, & un-lined).
This kit is supplied as a pair. Please contact us if you just require a single side.
Can be fitted to any conversion, not just one of ours.
Product Specs
- Flush fitting panel, with maximum aperture and seamless fit against the window.
- Mounts the Horrex Duoplisse blackout blind behind the panel to create a frame-less aesthetic.
- CNC profiled 6.5mm Birch Plywood panels and standoff blocks.
- Aluminium mounting brackets to mount the panels flush, supplied with an alignment tool for installation.
- Mounting brackets require riveting to the door and are hidden when fitted.
- Features adhesive foam tape and black vinyl to seamlessly fit against the window when fitted and mask off the area behind the blind from the outside.
- Approx. install time - 60-90 mins.
What's in the "Full Kit" box?
- 2x 6.5mm Birch Plywood Panels
- 8x Standoff Blocks
- 4x Recessed Blind Supports
- 8x Aluminium Mounting Brackets
- 1x Alignment Tool
- Adhesive Foam Tape
- Adhesive Black Vinyl Strips
- Fasteners
- Fitting Instructions
Options
- Full Kit - Fully lined kit, ready to fit. Choice of Anthracite or Silver automotive carpet (with blinds).
- Bare Kit - pre-assembled, unlined (with blinds).
Van Fitment
- Citroen Relay/Fiat Ducato/Peugeot Boxer '06-
